- Home
- Guides
Guides
Drum mixing problems, explained with measurements from real sessions. Each guide answers the question first and then shows the numbers.
How to remove the cardboard sound from a snare
Where the boxy, cardboard sound in a snare close mic sits, how to cut it without losing the drum's body, and why the level must be matched.
Guide · 2026-11-12How to reduce hi-hat bleed in snare and kick mics
Why EQ and gates do not remove hi-hat bleed from a snare mic, how an adaptive canceller does it with a close hi-hat mic as the reference, and what it needs as the reference.
Guide · 2026-11-12How to phase-align a multitrack drum kit
Align kick, bottom snare, toms and overheads to the snare top with measured delays and polarity, and avoid the pitfalls of manual nudging.
Guide · 2026-11-12Why a drum bus compressor pumps, and how to stop it
Why the kick makes the whole kit duck on a drum bus, how to keep compression above 80 Hz, take the kick past the compressor, and blend in the dry signal without phase cancellation.
Guide · 2026-11-12How to tame harsh cymbals and hi-hats
Why cymbal harshness is a few narrow resonant peaks rather than the whole top end, how to turn them down only while they ring, and why too much movement sounds like a phaser.